Step 1: Insert and solder in the pins for the Pro Micro (tip use a breadboard or bluetack to hold them in place.
Step 2: Insert and solder diodes. Note: the diode band should be oriented like the PCB marking.
Step 3: Solder the reset switch by adding solder to the pads
Step 4: (for those with plastic cases): Attach red legs/standoffs
Step 4a: (for those with plastic cases): Insert switches through the top plate and into the PCB and solder.
Step 5: (for those without plastic cases): Insert and solder switches.
Step 6: Add Pro Micro.
Ready to Program? Go here: Sweet16 Software instructions
Download the measurements as a .dxf here: sweet16.dxf
Link to purchase the Sweet16 Black
Link to purchase the Sweet16 White