User Tools

Site Tools


basics:parts_you_need_for_a_kit

This is an old revision of the document!


Here are the parts you need for every kit

There are 4 basic types of kits that are sold on 1upkeyboards and they represent the kits that are sold everywhere.

Kit 1) Barebone / PCB only kits

This type of kit is like the Sweet 16 and Super 16 kits sold on 1upkeyboards. These are a very basic kit, but they help us to understand what is really required at the most basic level of a kit.

  • PCB
  • Controller
  • Diodes
  • Switches
  • Keycaps
  • Standoffs (or something to stop it from resting on the table)

So let's go down the list and explain what everything is, and what it does.


Kit 2) Sandwich / Skeleton Kits

Sandwich or Skeleton kits

  • Sandwich
    • Top plate
    • Bottom plate
    • Standoffs or middle plate (to hold the two layers apart)
    • Legs/Feet
  • PCB
  • Switches
  • Keycaps

At 1upkeyboards, sandwich kits are available in 40%, 60%, TKL, and Full Size


Kit 3) Universal kit

  • Universal kit
    • Top plate (optional)
    • Base
  • PCB
  • Switches
  • Keycaps

Kit 4) It's not really a kit, it's a **Stock Upgrade**

We sell a number of “Controllers” that add on to stock boards that are sold in stores.


basics/parts_you_need_for_a_kit.1562532467.txt.gz · Last modified: 2019/07/07 15:47 by 1upkeyboard