Sweet 16 Macro Pad Assembly Instructions

Step 1: Insert and solder in the pins for the Pro Micro (tip use a breadboard or bluetack to hold them in place.

Step 2: Insert and solder diodes. Note: the diode band should be oriented like the PCB marking.

Step 3: Solder the reset switch by adding solder to the pads

Step 4: (for those with plastic cases): Attach red legs/standoffs

Step 4a: (for those with plastic cases): Insert switches through the top plate and into the PCB and solder.

Step 5: (for those without plastic cases): Insert and solder switches.

Step 6: Add Pro Micro.

Ready to Program? Go here: Sweet16 Software instructions

Download the measurements as a .dxf here: sweet16.dxf

3D printed case examples:

Link to purchase the Sweet16 Black

Link to purchase the Sweet16 White

  • assembly_guides/macropads/sweet16_assembly.txt
  • Last modified: 2022/10/30 19:44
  • by